Safety Instructions For Torches; Before Use; Removing/Charging/Inserting The Battery Pack - Parkside PTSA 12 A1 Traducción Del Manual De Instrucciones Original

Safety instructions for torches

■ Do not cover the device during operation.The cordless LED working
light heats up during operation and may cause burns.
■ Do not look into the light beam. Do not direct the light beam at people
or animals.
■ Do not allow children to use the appliance.You could inadvertently
dazzle other people or yourself.
■ The light source of this appliance cannot be replaced. Once the light
source has reached the end of its lifespan, the entire torch must be
replaced.

Before use

Removing/charging/inserting the battery pack

CAUTION!
► Always disconnect the mains plug before removing the battery pack 3
from or inserting it into the high-speed charger 7.
NOTE
► The battery pack is supplied partially charged. Before first use, charge
the battery pack 3 in the high-speed battery charger for at least
1 hour. In this way, you ensure full performance of the battery pack 3.
You can charge the lithium-ion battery at any time without shortening its
service life. Interrupting the charging process does not damage the
battery pack 3.
► If the battery pack 3 overheats during operation, it cannot be
charged. Allow it to cool down first.
■ Never charge the battery pack 3 if the ambient temperature is below
10°C or above 40°C.
■ 10 │ GB │ IE PTSA 12 A1