Guardian G2-202BX1 Manual De Instrucciones página 3

Figure 1
Figure 3
Figure 5
ADJUSTING LEG HEIGHT
1. To adjust leg height, remove C-Clip from adjustment hole, set leg to desired
height and return U-clip into adjustment hole. Make sure C-Clip clicks securely
into place.
2. Repeat for remaining legs making sure all are locked into place at the same
height.
3. Push down and pull up on each leg to be sure legs are locked into place.
Before using the seat, make sure all legs are set to the same preferred height.
CAUTION: Maximum weight limit for this chair is 550 lbs (249 kg).
MAINTENANCE
Periodic visual inspection of this bath chair is recommended to ensure that all parts
and hardware are secure, that components are in good working order and not
worn, torn, frayed, or loose, and that there are no obstructions or impediments to
normal, safe operation. If any part or mechanism appears to be unsafe or damaged,
do not use the product. If you experience problems, please contact Medline at
1-800-MEDLINE
NOTE: To maintain appearance and promote good hygiene, clean periodically with
mild soap and rinse with warm water. Wipe bath chair dry after each use.
Figure 2
Figure 4
G2-202BX1 (PIC-00303)
REVISED: 09/29/20