Publicidad
Idiomas disponibles
Idiomas disponibles
Technical data
1/2" Torque Wrench Set 5 pcs.
Item no.
Drive
Adjustable torque range
Triggering accuracy
Torque spanner length
Weight torque spanner
Only use the tool after
you have carefully read
and understood the
operating instructions.
Familiarise yourself with the operating
elements and the correct use of the tool.
Observe all safety instructions in the
manual. Behave responsibly towards other
persons.
The operator is responsible for accidents or
hazards to third parties.
If there is any doubt about the operation of
the appliance, contact the customer service.
Specified Conditions Of Use
The torque spanner is used for controlled
tightening of bolts and nuts with a preset
force on cars, motorbikes, caravans, etc.
Only suitable for domestic use and not for
commercial or industrial use. The spanner
may only be used as specified for its
intended purpose. Any other use or use that
goes beyond this is considered improper
use. The manufacturer cannot be held
responsible for any resulting damage.
+- 4% of scale value
Safety instructions
CAUTION
• Never make any modifications to the
product! Modifications will void the
warranty and the product may become
unsafe and dangerous.
• If the torque spanner has not been used
or stored for a long time, operate it several
times at a low torque setting to allow the
lubricant to distribute better inside.
• When not in use, store the spanner at the
lowest torque setting.
• Do not pull the handle below the lowest
torque setting.
• Do not continue to pull on the spanner
once the preset torque has been reached
and the spanner has loosened. Do not
apply further pressure to the torque
spanner, otherwise the part to be screwed
may be damaged.
• The tool is sturdy and designed for work-
shop use. However, it is also a precision
measuring tool and should be treated
as such.
ENGLISH
6
39010
½"
40-210 Nm
ca. 470 mm
ca. 1,3 kg
Publicidad
