Publicidad
Idiomas disponibles
Idiomas disponibles
4. Connect the IF-7WDCETH devices and their corresponding amplifier module to the system structure. To do this, right-click on
these devices and select Connect from the pop-up menu.
5. Save the changes to the installation (menu File > Save).
6. Send configurations to the IF-7WDCETH device. Right-click on the device name and select the Send Configurations option from
the pop-up menu.
ATTENTION
In order to be able to send configurations to the equip-
ment, it is necessary that the equipment and the PC are
within the same IP address range. It is also necessary
that the network addresses of the equipment and those
set from the configuration software match.
By default, the equipment's network settings are
as follows:
IP ADDRESS:
10.1.1.1
NETMASK:
255.0.0.0
GATETEWAY: 0.0.0.0 (no Gateway)
If you want to assign a different network address
to the device than the default one, follow the
section
5.1.
Configuration
addresses of the IF-7WDCETH.
IF-7WDCETH version 5.2.001 ENG
IF-7WDCETH
4ETH
of
the
network
Class D wall-mounted amplifier
with IP connection
17
Publicidad
