Publicidad
Idiomas disponibles
Idiomas disponibles
To set the PMR 446 operating channel
- Press the"
" key once, the channel number display will flash,
- Press"
" keys to select your desired main channel.
- Press the "PTT" key to confirm and quit
CTCSS code function
This function can help you to identify your group of users among the same channel. Only
the users with the same CTCSS code setting can listen and talk to each other, so the
CTCSS mode is like a sub code for Your closed user group. Please note that selecting a
CTCSS code does not assure total privacy: In radio communication, any PMR 446 radio
can listen to all communications on the same channel when using the default standard
setting with CTCSS = 0 (off).
To select a CTCSS code
Press the "
"key twice, the CTCSS code display will flash,
Press "
" keys to select your desired the CTCSS code (1~38, " 0 " is off)
Press the "PTT" key to confirm and quit.
FM Broadcast Radio
You can listen to FM Broadcast Radio with the speaker or through earphone.
Select FM Broadcast Radio Frequency
- Press "
" key 3 times; LCD will display FM Radio Frequency.
- Press and hold "
FM radio channel. The LCD will display the frequency and you can listen to the FM radio.
You can continue to scan for the FM radio frequency you preferred.
Select Receiving Volume in Broadcast Mode
Press "
" Key once (in Broadcast mode, this key toggles between Frequency setting and
Volume Setting)
Press "
" or "
Press "
" Key again to exit volume setting and to return back to frequency setting mode.
Priority of PMR 446 during Broadcast Mode
Even when your radio is in broadcast mode, the radio still monitors the PMR 446
frequency range for received calls or signals. If an incoming PMR 446 signal is detected,
the unit will automatically switch to PMR mode & you can listen to the PMR446
transmissions.
If you do not press PTT to answer, the unit will auto switch back to FM broadcast radio
mode after the PMR 446 transmission finished.
If you press PTT key to transmit, the unit will exit the FM broadcast radio mode & stay on
PMR446 mode now.
After finishing PMR communication, you can press "
broadcast mode again. The unit will then receive on the last FM broadcast radio frequency
you had selected before.
Call Tone
You can use Call Tones (melodies) to get the attention of other people with radios on the
same channel and CTCSS tone. You can also use Call Tones as the signal of the start or
end of a transmission.
Press "
" key, LCD displays icon and your call tone will be transmitted to nearby
receivers set at the same channel.
" or "
" key to scan FM radio frequency. It will stop when it finds a
" to adjust the volume when listening to FM radio.
" times again to re-enter the FM
EN
Publicidad
