Warning Code List - Macurco RD-VRF Instrucciones De Usuario

MODBUS
ADDRESS
0x0006 Input reg.
(float 32bit)
0x0007
0x0008 Input reg.
(float 32bit)
0x0009
0x0016 Input reg.
(float 32bit)
0x0017
0x0018 Input reg.
(float 32bit)
0x0019
Input reg.
0x001A
(float 32bit)
0x001B
Input reg.
0x005A
(float 32bit)
0x005B

8.3 Warning Code List:

NO_WARNING
WARMUP_WARNING
INVALID_TEMPERATURE_WARNING
INVALID_ACTIVE_WARNING
INVALID_REFERENCE_WARNING
INVALID_PEAK_WARNING
INVALID_DATA_WARNING
CALIBRATION_MODE_ACTIVE
CALIBRATION_MODE_FAULT
MISMATCH_HYBRID_VALUE_WARNING
SENSOR_HW_TEST_WARNING
SENSOR_END_OF_LIFE_WARNING
SENSOR_MANTEINANCE_WARNING
SENSOR_HW_TEST_TIMEOUT_WARNING
SENSOR_HW_TEST_CAPA_WARNING
SPARE0 Not used (To be Masked by user)
SPARE1 Not used (To be Masked by user)
INVALID_ZERO_WARNING
INVALID_SENSITIVITY_WARNING
Bits from 18 up to 31 are not used. To be masked by user.
REV – 1.0
Table 8-1: MODBUS INPUT REGISTERS
DATA
R/W Register's Name
LENGTH
r Sensor[0].Temperature
r Sensor[0].Concentration
r Sensor[0].Warning
r Sensor[0].Status
r Sensor[0].Error
r Detector.Error
34-5354-0001-14
Function
Description
Temperature
Sensor #0
Target Gas
Concentration Sensor
#0.
Warning Code on
Sensor #0
Status Code on Sensor
#0
Error Code on
Sensor #0
Detector.Error
All bits in 0 state.
If BIT 0 in 1 state.
If BIT 1 in 1 state
If BIT 2 in 1 state
If BIT 3 in 1 state
If BIT 4 in 1 state
If BIT 5 in 1 state
If BIT 6 in 1 state
If BIT 7 in 1 state
If BIT 8 in 1 state
If BIT 9 in 1 state
If BIT 10 in 1 state
If BIT 11 in 1 state
If BIT 12 in 1 state
If BIT 13 in 1 state
If BIT 16 in 1 state
If BIT 17 in 1 state
Measuring
Unit
Kelvin
Current
measuring unit
(ppm, %LEL or
%VOL)
See Table
See Table
See Table
See Table
22 | P a g e