Levelling The Washing Machine - Infiniton WM-58D Manual De Usuario

INSTALLATION

Levelling the washing machine

� Warning!
• The lock nuts on ali tour feet must be screwed tightly against the housing.
1.Check if the legs are closely attached to the cabinet. lf not, please turn them to
their original positions tighten the nuts.
2.Loosen the lock nut turn the feet until it closely contacts with the floor.
3.Adjust the legs and lock them with a spanner, make sure the machine is steady.
�
�.l
Connect Water Supply Hose
� Warning!
• To prevent leakage or water damage, follow the instructions in this chapter!
• Do not kink, crush, modify or sever water inlet hose.
• For the model equips hot valve,connect it to hot water tap with hot water suppl
hose. Energy consumption will decrease automatically for sorne program.
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
1.Connection between ordinary tap and inlet hose.
Loasen clamp nut and Tighten clamp nut
tour bolts
2.Connection between screw tap and inlet hose.
Tap with threads and inlet hose
��
Raise
Press slide bushing,
insert inlet hose into
connecting base
9
Lower
Connection finished
Special tap for washing machi ne