Care And Cleaning; Changing Oven Light Bulb; Cleaning Interior, Exterior, And Door - Menumaster DEC1800D Serie Manual

Care and Cleaning

An authorized servicer must inspect equipment annually.
Record all inspections and repairs for future reference.

Changing Oven Light Bulb

WARNING
To avoid electrical shock hazard unplug power cord
or open circuit breaker to microwave oven before
replacing light bulb. After replacing light bulb,
reconnect power.
CAUTION
To avoid burns and cuts, wear gloves to protect
hands should bulb break. If hot, allow bulb to cool.
Tools and Bulb
• Protective gloves
• Standard screwdriver or ¼-inch socket
• Light bulb rated 230 volt, 25 watt
1. Unplug oven.
2. Remove screw from back of oven.
• See figure below.
3. Slide rail out from oven cavity.
• See figure below.
All manuals and user guides at all-guides.com
4. Remove bulb by turning counterclockwise, being
careful not to burn fingers or break bulb.
• Replace with bulb rated 230 volt, 25 watt.
5. Slide rail into oven cavity, replace access cover and
screws.
6. Plug in oven.

Cleaning Interior, Exterior, and Door

To avoid electrical shock which can cause severe
personal injury or death, unplug power cord or open
circuit breaker to oven before cleaning.
Clean microwave oven with mild detergent in warm
water using soft sponge or cloth. Wring sponge or cloth
to remove excess water before wiping equipment. If
desired, boil a cup of water in microwave oven to loosen
soil before cleaning.
• Do not use abrasive cleansers or cleaners containing
ammonia. These could damage finish.
• Never pour water into microwave oven bottom.
8
WARNING