Descargar Imprimir esta página

auna SELECT Manual De Instrucciones página 49

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Automatic updating of the time
Automatic updating sends data via DAB, FM or the network. The time is only
updated in the corresponding mode. Therefore, a mode should be selected
which you use regularly.
DAB and FM use time signals that are transmitted together with the radio
broadcast. With the network, time signals are used which are sent from the
Internet radio portal as soon as the device is connected to the network.
1.
Select the type of update source (DAB, FM, network or no update).
2. Set the time zone if you have selected the update via network.
3. If the country in which you are located uses summer and winter time,
the time received from the network may be wrong by one hour. Activate
the daylight saving time option to correct this.
Note: If the time is updated by DAB or FM mode, the summer time
setting has no effect on the time. The device updates the time
automatically as soon as the time information is available.
EN
49

Publicidad

loading

Este manual también es adecuado para:

Two 2.1100300171003001810030019