Publicidad
Idiomas disponibles
Idiomas disponibles
EN
To Open - Ensure that the base locks at the bottom of the gate door are
in the horizontal position (Figure 1). Pull the spring lock
away from the easy open latch while simultaneously lifting the lock
lever upwards (Figure 2 and 3). This will release the locking latch
from the gate frame and allow the door to push or pull open.
To Close - Pull the door shut and ensure that the door latch on top
closes and then place the lock at the bottom of the gate down
on the side occupied by the child, Gate will swing both ways unless one
of the swing stops is down. Gate will not swing at all if
both swing stops are down.(Figure 4)
To Open - Ensure that the base locks at the bottom of the gate door are
in the horizontal position (Figure 1). Pull the spring lock
away from the easy open latch while simultaneously lifting the lock
lever upwards (Figure 2 and 3). This will release the locking latch
from the gate frame and allow the door to push or pull open.
Once the gate is opened,it can close up automatically and lock up.
When the opening width of the gate is 30 Degrees, the gate has the
function of Automatic Closing (Figure 5).
NOTE When the gate opening width is greater than 90 Degrees, the
gate will be normally open.(Figure 6)
11
Publicidad
