Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS
CAUTION: Risk of product damage. To avoid plugging the showerhead spray outlets, use thread sealant tape
on the shower arm threads. Do not use thread sealant compound (pipe dope).
NOTE: The showerhead and escutcheon are not provided.
‰ Remove the temporary nipple from the shower ell.
‰ Slide the escutcheon onto the end of the shower arm that will be closest to the wall/ceiling.
‰ Apply thread sealant tape to the shower arm threads closest to the wall/ceiling.
‰ Thread the showerarm into the shower ell.
‰ Carefully tighten the shower arm with a clean strap wrench.
‰ With the showerhead off, turn on the water to flush out the system.
‰ Check connections for leaks. Repair as needed.
‰ Turn off the water.
‰ Install the showerhead according to the showerhead manufacturer's instructions.
1491055-2-A
3 of 8
INSTALL THE SHOWER ARM
Questions? Problems? For additional assistance, please contact KALLISTA's Customer
Shower Arms
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
Publicidad
