FitNord AQUA 300 Manual Del Usuario página 11

Inflate the board to desired pressure, but never exceed the maximum pressure! Lower
pressure, such as 6-10 PSI works well for relaxed paddling and sunbathing. Higher
pressure makes the board faster, steadier and more rigid. When you need higher
performance, we recommend inflating the board to the recommended pressure or
close to it. Inflating the board takes about 5-15 minutes. We recommend using your
whole body to avoid getting your hands tired. You can also use a compressor; the
valve adapters can be purchased separately.
AQUA 300
Recommended: : 10-15 PSI, maximum 15 PSI
AQUA Pro 330, AQUA Leaf and AQUA Zoom
Recommended: 15-18 PSI, maximum 20 PSI
AQUA Ruby
Recommended: 18-22 PSI, maximum 22 PSI
The FitNord pump is a Double Action Pump.
Initially, you can keep the plug closed allowing
the pump to push air into the board during
both the pulling and pushing phases. When the
pressure rises and the pumping
becomes heavier, open the plug which makes
the pumping easier (single action mode).
The pump hose can be attached to either side
of the pump - one side (inflate) fills, the other
side (deflate) empties..
EN EN
11