Descargar Imprimir esta página

Troubleshooting; Specifications - Southwire MAXIS Xtreme MXB2000 Instrucciones De Operación

Publicidad

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING

Problem
Probable Cause
No voltage.
Bender will
not operate.
Loose pendant
cable connection
Bends are
Not properly adjusted
overbent a
for spring back
few degrees.
Too much squeeze on
Sides of conduit
are smashed
IMC conduit.
Bends are
Not properly adjusted
under-bent
for spring back
a few degrees.
Too little squeeze on
Rippling defects
IMC conduit.
SPECIFICATIONS
27
Possible Remedy
Check supply voltage circuit operation.
Check that switch is on.
Ensure that the pendant cable is securely
connected to the bender and the pendant
Determine how many degrees you are
overbent and subtract an equivalent
amount from your bend
Reduce roller pressure. See Section titled
"Adjusting the 1 ½" & 2" Pressure Rollers"
Determine how many degrees you are
under bent and add an equivalent
amount more to your bend
Increase roller pressure. See Section titled
"Adjusting the 1 ½" & 2" Pressure Rollers"
WARRANTY ON
SOUTHWIRE CONTRACTOR EQUIPMENT
What Does This Warranty Cover?
Five-Year Limited Warranty on Contractor Equipment
U
LLC warrants that all Southwire Contractor Equipment will be free from manufacturer
However, electrical components and consumable parts such as "ropes, blades, dies,
also excluded and Southwire Company, LLC will have no liability for any of the follow-
ing: normal wear and tear resulting from product use and damage arising out of
misuse, abuse, modification, and improper product maintenance. This warranty also
does not cover Southwire Contractor Equipment products that have been modified by
any party other than Southwire Company, LLC or its authorized third-party designee.
than the product's original end user.
One-Year Limited Warranty on Electrical Components and Consumable Parts
Under Southwire's 1-Year Limited Warranty, Southwire Company, LLC warrants that all
electrical components and consumable parts such as "ropes, blades, dies, draw studs,
"grips will be free from manufacturer defects for a period of one-year from the date of
the original end user's purchase.Under this 1-Year Limited Warranty, Southwire
Company, LLC will have no liability for any of the following: normal wear and tear
resulting from product use and damage arising out of misuse, abuse, modification, and
improper product maintenance. This warranty also does not cover Southwire electrical
components and consumable parts that have been modified by any party other than
Southwire Company, LLC or its authorized third-party designee. This 1-Year Limited
Warranty is not transferrable to or enforceable by any person other than the product's
original end user.
Exclusion of Incidental, Consequential, Indirect, Special and Punitive Damages
28

Publicidad

Solución de problemas

loading

Este manual también es adecuado para:

66115140