universalblue UBLA2804-21 Manual De Instrucciones página 63

Moreover, the temperature below zero will damage the
programming controller.
Grounding Introduction
A washing machine must be connected to grounding devices. If any
problems arise, this device can reduce the risk of electrical shock.
The device is equipped with a wire that includes a grounded plug. If
you want to know if your washing machine is properly grounded,
contact your service personnel.
If your washing machine emits smoke or an unusual odor, cut the
power and contact professional maintenance staff.
Washing machines must have a water inlet.
To ensure proper operation, water injection tests are performed
before the washing machine leaves the factory, so there may be
water inside the drum.
Water inlet connection
1. The water supply pressure should be
between 30kPa and 1OOOkPa.
2. Do not
connecting the inlet pipes to the
valves.
 Two
connectors of both ends of the pipe to
prevent water leaking.
 Open the tap and check if the
connectors leak.
 Check the pipes regularly and replace them if necessary.
 Make sure that the pipes are not damaged or entangled with
each other.
force the
seals are
thread when
supplied in the
63