universalblue UBLA2804-21 Manual De Instrucciones página 82

 If waste accumulate, it will influence the water
inlet speed.
 Take off the soft pipe from the universal
coupling side.
 Remove the screwing device according to the
arrow showed.
 Wash the inside of the screwing device.
 Reconnect the cleaned screwing device with the water inlet
soft pipe.
Cleaning the inlet water valve (Suggestion: clean it every half year)
 Disconnect the soft pipe from the
washing machine.
 Remove the filter net from the water
valve.
 Clean the filter net with a toothbrush.
 Reconnect the soft inlet pipe.
If the washing machine freezes
 Cover the faucet and the universal coupling with a warm towel.
 Remove the water inlet tube and put it in 50-degree water.
 Pour approximately 2-3 L of 50-degree water into the drum.
82