Descargar Imprimir esta página

Dunsch DU34040-55 Instrucciones Originales página 23

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Before using the machine, please press switch trigger to check if the battery is
full enough for properly working.
Those 4 LED lights show the status of the capacity level of the battery:
Battery fully charged
Battery 30% charged
Before start make sure the battery pack was put into the trimmer.
Switching on and off
WARNING!
Grip the hedge trimmer with both hands, left hand holding the front handle,
and the right hand holding the rear handle.
Switch on:
Fig.7
 First remove the blade cover from the hedge trimmer.
 Left handle: hold the front handle (3) with safety switch (4).(Fig.7)
 Right handle: Press the safety lock (6) and keep it down then pull the switch
lever (7).(Fig.8)
GB
Battery 60% charged
No electricity
Fig.6
Fig.8
21

Publicidad

loading