Publicidad
Idiomas disponibles
Idiomas disponibles
Switch off:
Release the switch lever (7) or safety switch (4).
CUTTING HEDGE
Before you start your work, select branches with a diameter not bigger than
24mm and cut them with a pruning shear. A trapezoidal cut corresponds to the
natural, growth of plants and results in optimal hedge growing.
-
First cut the sides from the bottom to the top. Cut the upper part giving it the
shape you prefer, in a straight horizontal form, roof-like or rounded.
-
The safety blade has laterally rounded and staggered cutting teeth to reduce
danger of injury. The additional shock protection avoids inconvenient
kickback when the blades come into contact with walls, fences etc.
-
If the blades are jammed or blocked by obstacles, switch the motor off
immediately, pull the plug, and then remove the object jamming the blades.
-
Caution! Metal obstacles like fences etc. may damaged the cutting blades.
MAINTANCE
Before performing any maintenance or cleaning work, Always pull out the
battery pack!
-
Check your machine regularly before starting the work.
-
Damaged cutting blades have to be repaired or exchanged by a qualified
service man before working with the machine
-
After each cutting operation, clean the cutting blade with a soft brush and
cloth with lubricating fluid oil and spray a thin layer of fluid protective oil on
the completes blade.
-
Always keep the ventilation slots in motor housing clean
-
Never clean or spray a machine with water .clean the motor housing only
with a moist cloth and never apply detergents or solvents! These could ruin
the plastic parts of the machine. Finally, dry the motor housing carefully.
-
Store the machine with the supplied protection cover.
-
Only use original accessories and spare parts.
GB
22
Publicidad
