LD Systems MAILA SUB Manual De Usuario página 14

To set the frequency in Hertz under FREQ, the Q factor or the functionality of bands 1 and 10 under Q and
the amplification in dB under GAIN, select the appropriate column in the desired equalizer band (NR 1 -
10), confirm and set the value as required and confirm again. The selected value is shown with a white
background.
The EQ bands can be disabled individually by selecting and confirming the band number. An X is now
displayed in place of a tick symbol and the values in the corresponding band appear grayed out. Select
and confirm again to activate the band.
The entire equalizer can be deactivated by selecting the EQ line, confirming, then selecting OFF and
confirming again. All values in the equalizer are now greyed out. To activate the equalizer, select ON
and confirm. To exit the menu level, select the arrow symbol and confirm your selection.
DELAY
To delay the audio signal, select DELAY off, confirm, then select the desired submenu item and confirm
again. The value or status can now be set as desired, confirm each entry.
DELAYTIME
x.x ms / m / ft Set delay time in selected delay unit
DELAY UNIT
TEMPERATURE
TEMP. UNIT
To exit the menu level, select the arrow symbol and confirm your selection.
POLARITY
To set the polarity of the audio signal, select POLARITY off, confirm, then select the desired status and
confirm the selection.
14
ms Delay unit milliseconds
m Delay Unit Meters
feet Delay unit feet
x °C / °F Set the ambient temperature in the selected temperature unit
°c Temperature unit Celsius
°F Temperature unit Fahrenheit
<
VOLUME
0 ms
105
LVL VOL
+0.0
EQ
NR
1
2
3
4
POLARITY
normal
inverted
EQ
NR
1
2
3
4
Hz
EQUALIZER
0 ms
ON
105 Hz
FREQ Q GAIN
LVL VOL
10.000 1.2 -8.5
4.000 0.8 +3.0
2.000 2.5 -10.0
500 0 +9.0
normal polarity
EQUALIZER
0 ms
inverted polarity
ON
105 Hz
FREQ Q GAIN
LVL VOL
10.000 1.2 -8.5
4.000 0.8 +3.0
2.000 2.5 -10.0
500 0 +9.0
EQ
EQ
NR FREQ
1 10.000
2 4.000
3 2.000
4 500
EQ
NR FREQ
1 10.000
2 4.000
3 2.000
4 500