san ignacio 43808 Manual De Instrucciones página 6

TROUBLE INDICATORS
- Low power: "LO". Please replace the batteries and put new
ones.
- Overload: "EEEE". Please remove the container to avoid any
possible damage to the product.
WEIGHTING SETTING
Install the batteries, and then the scale will display the time. Press "ON/ZERO" to enter
to the weight function.
COUNTDOWN SETTING
1. When the display is showing the time, press the "UNIT" but-
ton to enter to the countdown mode, or, in the weighing mode,
long press "UNIT" and hold for 2 seconds to enter the count-
down mode and beginning directly. The default time is 1 minute.
2. Press the "UNIT" button to enter the countdown mode. Press "ON/ZERO" to set the
countdown (minutes). Press the "UNIT" button to increase 1 minute. Press it contin-
uously to increase faster. Press "ON/ZERO" again to set the seconds. Press "UNIT" to
increase 1 second. Press it continuously to increase faster and press" ON/ZERO" to begin
the countdown.
COUNTDOWN TIME OUT SETTING
Once the countdown is running, press "UNIT" to pause it. Press "UNIT" again to resume.
Press"ON/ZERO" to stop the countdown. Press "ON/ZERO" again to clear the data. Press
and hold on "ON/ZERO" for 2 seconds and the scale will display the time.
BUZZER
Once the countdown is completed, the scale will buzz during 1 minute. Press "UNIT" to
repeat the countdown. Press "ON/ZERO" to clear the data.
CLOCK SETTING
Once the scale is on, long press and hold on "UNIT" for 2 seconds
to set the hour. Press "UNIT" to increase 1 hour. Press "ON/ZERO"
to set the minutes. Press"UNIT" to increase 1 minute. Press "ON/
ZERO" to finish the setting
The time can be switched to 12 hours mode or 24 hours mode.