Publicidad
Idiomas disponibles
Idiomas disponibles
The product is designed to sit in the wall-mounted bracket vertically.
1.
Select an installation position located in the
EN
proximity of the electrical outlet.
2.
Fix the provided wall bracket using suitable
screws and wall plugs (not supplied).
Ensure not to pinch the power cable during
installation.
Note: Do not drill into any pipes or mains cables
beneath the surface during mounting holes
preparation. The fixing points must be capable of
supporting the full weight of the product.
5/ USE
Operating the vacuum cleaner
1.
Insert the plug of the power cable into an electrical outlet.
2.
Switch the I/O power switch to the "I" position to turn the appliance on.
3.
After using the appliance, switch it off by pressing the I/O power switch to "O".
4.
Empty and clean the dust cup.
Accessories
Before changing the nozzles, always switch the vacuum cleaner off first.
1.
Floor nozzle
2.
2-on-1 tool:
•
Brush nozzle
6/ MAINTENANCE AND CLEANING
Always switch off the appliance, and remove the mains plug from the wall socket
before emptying the dust cup.
1.
Do not submerge the appliance, and its supply cord in water or other liquids.
2.
Avoid corrosive liquids and materials. Do not use any abrasive cleaners, chemicals,
glass cleaners, universal cleaners, disinfecting agents or oil-based maintenance
agents! Those products may damage the appliance.
3.
Do not disassemble or modify the appliance. Changes or modifications will void
the user warranty.
WARNING: This appliance does not stand up on its own. After vacuuming,
4.
disassemble the appliance, and wind up the supply cord. Store the product safely
away on level ground when not in use.
Emptying the dust cup
1.
To empty the dust cup while it is attached to the main body, position the dust cup
over a dustbin and unlock the dust cup bottom cover release button.
2.
Empty the dust cup and close the cover.
Removing and cleaning the dust cup
1.
To remove the dust cup from the main body, press the dust cup release button.
Tilt the dust cup and lift it off to remove.
2.
Hold the dust cup over the dustbin and unlock its bottom cover release button.
3.
Empty the dust cup from dust and debris.
4.
Remove the dust screen with the filter from the dust cup.
5.
To clean the interior of the dust cup, rinse it with water. Let it dry completely.
•
Crevice nozzle
8
Publicidad
