KALLISTA P21653 Instrucciones De Instalación página 3

INSTALLATION INSTRUCTIONS
‰ Insert the escutcheon shank through the hole of the deck. Ensure the O-ring is in the groove under the
escutcheon.
‰ From underneath the deck, slide the washer and thread the nut onto the shank. Tighten the nut.
‰ Thread the hose guide onto the shank and handtighten.
‰ From the top of the bath or finished deck, insert the smaller end of the flexible hose through the
escutcheon.
‰ From the underside of the bath or finished deck, insert one washer into the flexible hose.
‰ Tighten the flexible hose onto the water source.
‰ Run cold and hot water through the hoses to flush out dirt and debris.
‰ Insert a washer in the top end of the hose and thread the handshower holder onto the flexible hose.
‰ Insert a screen washer into the handshower holder and thread the handshower handle into the handshower
holder.
‰ To avoid kinking, remove any twists or loops in the hose.
‰ Check for leaks and for smooth operation. Perform any necessary repairs or adjustments.
1491201-2-A
3 of 8
Deck-Mount Handshower Trim
1. INSTALL THE MOUNTING BRACKET
Questions? Problems? For additional assistance, please contact KALLISTA's Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.