Publicidad
Idiomas disponibles
Idiomas disponibles
EN
1
6. MAINTENANCE AND CLEANING
•
WARNING: Switch the product off and unplug it from the mains socket before each
cleaning.
•
WARNING: Do not remove the fan guards for cleaning or maintenance.
•
WARNING: Allow the product to cool off before handing or cleaning it.
•
Clean the product with a soft dusting cloth.
•
Do not allow water or other liquids to enter into the engine unit (8) as it can cause
short circuits, fires, electric shocks or other hazards.
•
Do not use any aggressive cleaning liquids, rubbing alcohol or other chemical
solutions as they can cause damage to the housing and malfunctioning.
•
Keep the air vents at the rear of the engine unit (8) from dust and lint.
•
You can use a vacuum cleaner to remove dust and lint from the air vents and the
fan guards.
•
Store the product in a cool and dry place if it is not used for a long time.
7. GUARANTEES AND LIMITATIONS OF LIABILITY
This product is guaranteed for a period of 36 months (including the legal guarantee of
24 months as defined by local law as well as a commercial guarantee of 12 additional
months offered by the brand) from the date of purchase, against any failure resulting
from a manufacturing or material defect.
This guarantee does not cover damage resulting from a faulty installation, incorrect use,
or normal wear and tear. More specifically, the guarantee does not cover:
•
Damage or problems caused by incorrect use, accidents, modifications or an
electrical connection with the wrong current or voltage.
•
Products that have been modified or whose tamper evident seal or serial number
has been damaged, altered, removed or rusted.
•
Replaceable batteries and accessories are guaranteed for 6 months.
•
Battery failure, as a result of over-charging or non-compliance with the safety
instructions set out in the manual.
•
Cosmetic damage, including scratches, dents, or any other element.
•
Damage caused by any servicing operations carried out by non-authorised persons.
•
Faults caused by normal wear and tear or the normal ageing of the product.
•
Software updates as a consequence of changes to network settings.
•
Product failure resulting from the use of third party software to modify, change or
adapt the product as supplied.
•
Product failure resulting from its use without manufacturer-approved accessories.
•
Rusted products.
The manufacturer is not liable for the loss of data stored on the hard drive. Similarly,
2
A
12
Publicidad
