Removing The Shield Visor; Installing The Shield Visor - Sena Outstar S Guia Del Usuario

2 WEARIng THE HELMET

2.3 Removing the Shield Visor

2
Hook A
1. Unlatch the left side of the shield visor to detach it from hook A, and
open the shield visor to the fully opened position.
2. Pull the shield visor outward while pushing the shield ratchet lever
upward.
3. Repeat Step 2 on the opposite side.

2.4 Installing the Shield Visor

Hook B
Hook C
1. Align hook B, hook C, hook D, and hook E to the shield ratchet as
shown in the illustration above.
2. Insert hooks B-E into the shield ratchet while pushing the shield
ratchet lever upward.
3. Release the shield ratchet lever to lock the shield visor into place.
4. Repeat the process on the opposite side.
1
1
1
Hook D
2
Hook E
OUTSTAR S Bluetooth
2
Helmet | 10
®