POLAR 8
Welcome to the HK Audio family!
Thank you for choosing a brand-name product made by our company. It
was engineered and built with the greatest care so it will serve you well for
many tomorrows to come.
Even if your experience with sound systems runs deep, some things
about this product are sure to be new to you. This is why we ask that you do
not set this manual aside without reading it first. Be sure to keep it in a
safe place for later reference.
Here's wishing you the best sound at every occasion!
Your HK Audio Team
Strong electromagnetic interference or electrostatic discharge
may prevent the product from functioning normally. If this happens, the
product may be returned to normal operation by powering off and on
again. Should this not result in the product functioning normally again,
please move the product away from the source of disturbance and try
again.
Warranty
Register online with ease at www.hkaudio.com.
http://warranty.hkaudio.com
The warranty registration is only valid if made within 30 days of the date
of purchase.
HK Audio
Technical service
Postfach 1509
66595 St. Wendel, Germany
Fax: +49 6851 905 100
1 General Information
1.1 Unpacking and Inventory
Please check that all items are included in the delivery when unpacking the
system. The POLAR 8 system consists of a subwoofer, a mid/high unit
(column top) and a spacer (distancing element without speakers). The box
also contains a padded protective cover for the subwoofer, a carrying bag
for the two column elements and the mains cable.
1.2 The Components
The Subwoofer
The active system subwoofer houses the woofer and the system elec-
tronics including power amplifiers. The signal-carrying plug-in base for
connecting the column elements as well as a carrying handle are located on
the top. The control panel with controllers
and connections is recessed to protect the
controls from damage. The bass reflex ports
are located at the bottom on the front, and
the power switch and mains socket are on
the rear.
The Column
The column consists of the Mid/High unit
and the spacer. The spacer is plugged into
the subwoofer's plug-in base using the inte-
grated signal-carrying connector. The mid/
high unit is attached to the spacer using the
same connector system.
This connects the mid/high unit and spacer
both mechanically and electrically, with no
additional wiring of the speakers required.
1.3 Setting up the System
Connecting Components
• Place the subwoofer on a level, stable
surface.
• Connect the spacer and the mid/high unit to the subwoofer as
described in 1.2.
• Make sure the elements are firmly connected to each other.
• Plug the power cord into the rear mains socket.
Information: The system can also be operated without spacer (e.g.
when positioned on a stage or on a table). To achieve the best sound
distribution, the mid/high unit should be placed at about head height.
POLAR 8 1.0
Mid/High
Unit
Spacer
Subwoofer
3