Assembly; Start Up; Turning On And Off - Truper ASP-16 Manual

Assembly

A
B
Accessories
• Insert the hose into the vacuum port (G).
• If necessary, connect one or more extension tubes to the
free end of the hose.
• Choose the appropriate nozzle and connect it to the free
end of the hose or if necessary to the extension tube (H).
G

Start Up

Turning ON and OFF

• To turn the vacuum cleaner on, plug the power cord into
the electrical outlet.
• Install the switch in the "I" (ON) position.
• To turn the vacuum cleaner off, install the switch in the
off position "O" (OFF), and disconnect the power cord
from the outlet.
CAUTION
• Always verify that the switch is in the off
position before connecting the power cord to the outlet.
C
Accessories
D
• Insert the handle (A) into the container lid, make sure that
both mamelons are inserted into the lid boxes. Attach the
handle using the 2 screws provided in one of the bags.
• Pull the latches (B) outwards to lift the motor cover (C).
• Remove all accessories from inside the container.
• The dry vacuum cloth filter (D) is factory installed,
remember to use the vacuum cleaner with one of the
filters installed otherwise the motor will be damaged and
the warranty will be void.
• Turn the container (E) upside down and install the four
wheels (F) in their respective mounts on the base of the
container. Rotate the container again to support the wheels
on the floor.
• Install the motor cover back on the container until the
latches click.
F
Switch
E
H
ENGLISH
7