Assembly - SPORTSTECH Ergometer X100-C Manual Del Usuario

4. ASSEMBLY

Firmly tighten all component parts
and pre-assembled parts!
Step 1
Unpack the device and dispose of the plastic
protective wrapping in accordance with the
disposal guidelines.
locking knob
While holding the device, gently twist the
locking knob counterclockwise to release it
slightly from the main frame to allow the de-
vice to unfold. When it is fully open, tighten the
locking knob.
Step 2
Remove the two pre-installed screws with
washers from the rear stabilizer to the main
frame. Thread the screws with washers through
the main frame and attach them to the rear
stabilizer. Tighten the screws with the Allen key
without using too much force.
Repeat the process for the front stabilizer.
26