Ec- Declaration Of Conformity; Operating Instructions - Jepson MAGPRO 40 2S Instrucciones De Servicio

EN

1. EC- DECLARATION OF CONFORMITY

(according to Appendix IIA of the machine Directive)
We, Jepson Power GmbH, Ernst – Abbe – Straße 5, 52249 Eschweiler, Germany, as the manufacturer
declare herewith under our responsibility that the product:
Name:
Type:
Manufacturing date:
Serial number:
complies with the following standards, directives and referenced standard documents:
2006/42/EC Machinery Directive
EN ISO 12100:2010
EN61029-1:2009 + A11:2010
EN61029-2-9:2012+A11:2013
EN61029-2-10:2010+A11:2013
Pierre Michiels, Managing Director
Name, Position

2. OPERATING INSTRUCTIONS

Please read this manual thoroughly before the machine is transported and before any operation.
Reproductions of any kind may be made only with our authorization. The manufacturer reserves the
right to make changes to the technical design of the development without notice. Changes for technical
advancement reserved.
FOR YOUR SAFETY!
Read the manual
Wear protective goggles
Wear ear protector
Wear mask
Wear safety shoes
Wear proper close-fit work clothing
Do not wear protection gloves when machine is running or machine operation.
Wear protective gloves to prevent injuries from sharp metal swarfs or debris.
4
Magnetic Core Drill Machine
MagPro 40 2s | MagPro 80 4S
See machine label
See machine label
Eschweiler, 01.08.2021
EN