Parts; Assembly - Truper ASP-04 Manual

Parts

Handle
Switch
Switch Mount for
accessories
Cable
Blowing
holder
port
Solid's filter
Opening
latches
Vacuum Vacuum
port port
Foam filter
Power
(liquid's suction)
Cord
Container
2 in 1 brush nozzle
Casters
Hose
Extension
tubes

Assembly

• Pull the latches (A) outwards to lift the motor cover (B).
D • Remove all accessories from inside the container.
• The dry vacuum cloth filter (C) is factory installed, remember to
use the vacuum cleaner with one of the filters installed otherwise
B
the motor will be damaged and the warranty will be void.
• Insert the handle into the container lid, make sure that both
mamelons are inserted into the lid boxes. Attach the handle using
the 2 screws provided in one of the bags (D).
• Turn the container (E) upside down and install the four wheels
(F) in their respective mounts on the base of the container.
Rotate the container again to support the wheels on the floor.
A
Accessories Accessories
C • Install the motor cover back on the container until the latches
click.
F
E
6