System Setting - TMEZON MZ-IP-V739B Manual Del Usuario

Description On Indoor Monitor
1
2
1
2
3
4
5
Name
Power LED, the power indicator of the indoor monitor.
1
2
1 The door 1 state lights, to door 1 working when the LED is on.
The door 2 state lights, to door 2 working when the LED is on.
2
3
4 TFT display View visitor's image or menu interface displayed on the TFT screen.
5 Microphone
Transmit the voice to outdoor camera.
1. Transfer call, during conversation mode press this button to transfer calls to
another indoor monitor.
6
Transfer call
2. Internal communication, in standby mode, press the button to activate internal
communication with the other indoor monitor.
1. Monitor, watch the door and camera images.
7
Monitoring
2. In file list interface, press this button to page up.
1. Talk, press this button to activate conversation mode.
8
Talk
2. In file list interface, press this button to page down.
9
Unlock, release the door lock.
Unlock
1. Hang up, during conversation press this button to end conversation mode.
10
2. Return, on menu interface press this button to return to the previous.
Hang up
1. In standby mode, press the button "
2. On the menu interface, scroll the button "
11
3. On menu settings, after choosing sub-menu setting, press the button "
enter sub-menu interface .
4. When setup menu, press this button to enter edit mode, scroll this button "
up or down to modify parameters, then press this button to confirm.
12
Speaker Sound from outdoor camera.
Insert a TF card to store video records, audio records and photographs, supports up
to 256GB. All the recordings and photographs are be stored in the TF card of the
monitor. If the TF card capacity is less than 64GB, the file system format of the
TF card slot
13
TF card must be Fat32. If the TF capacity is greater than or equal to 64GB, the file
system format must be exFat. And it is recommended to use a TF card with a writing
speed greater than Class 10 on the device.
Note:
The back-light of each button will be on when user presses any button or some visitor
calls on the outdoor bell. If the indoor monitor is in standby mode, all button's back-lights
will be off in 10 seconds.
6
11
12
7
Monitoring
8
Talk
9
Unlock
10 11 13
TF
Hang up
Descriptions
" once to access the main menu.
" up or down to move the cursor.
GB-5
Set System Parameters On Indoor Monitor
Monitoring
Setting
Outdoor bell and Camera monitoring
Door1 AHD1080P
DOOR1 2021/05/17 17:00:02

System setting

" to
"
Transfer Recording
At home Photo frame
SD Camera1 AHD720P
CAM1 2021/05/17 17:00:12
System setting
Device_id 1
Time 2021-05-18 06:45
Date format YY-MM-DD
Standby clock On
Language English
Keytone
On
Weather On
Key backlight
On
Door panel backlight
On
Standby display
On
GB-6
SD