KALLISTA P24443 Instrucciones De Instalación página 5

INSTALLATION INSTRUCTIONS
‰ Determine the location for the slidebar.
‰ Mark the location of the holes for the wall anchors. Drill the holes and install the wall anchors.
‰ Attach the escutcheons, sleeves, and hubs with the screws.
‰ Slide the handshower bracket onto the tube.
‰ Insert the couplings into the ends of the tube. Line up the holes in the tube with the holes in the couplings.
‰ Place the tube over the sleeves.
‰ Tighten the set screws so that they engage with the groove in the hubs.
‰ Screw the caps onto the exposed ends of the set screws.
1491210-2-A
5 of 16
4. INSTALL THE OPTIONAL SLIDEBAR (P24456)
Drill 5/16" hole
for anchors
Anchor
Escutcheon
Sleeve
Hub
Screw
Drill 5/16" hole
for anchors
Anchor
Escutcheon
Sleeve
Hub
Screw
Handshower, Hose
& Handshower Accessories
Cap
Coupling
O-ring
Set Screw
Tube
Handshower Bracket
Coupling
O-ring
Set Screw
Cap
Questions? Problems? For additional assistance, please contact KALLISTA's Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.