Descargar Imprimir esta página

Boil Dry Protection; Care And Maintenance - Russell Hobbs Attentiv 26200-70 Manual

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 23

BOIL DRY PROTECTION

If your kettle boils dry, a safety cut-out device will automatically switch it off. If this happens, unplug your
kettle and allow it to cool down until the cut-out resets itself. Allowing your kettle to boil dry will shorten
the life of the element.

CARE AND MAINTENANCE

1.
Unplug the stand, and let the kettle cool before cleaning.
2.
Wipe all surfaces with a clean damp cloth.
3.
Open the lid.
4.
Squeeze the two lugs together on the anti scale filter then remove it from the kettle.
5.
Rinse it under a running tap while brushing with a soft brush.
6.
Insert the anti scale filter back into the kettle and push it into place until it clicks.
Descale regularly, (at least monthly).
Descale regularly. Use a proprietary brand of descaler suitable for use in plastic-bodied products. Follow
the instructions on the package of descaler.
Products returned under guarantee with faults due to scale will be subject to a repair charge.
RECYCLING
W
To avoid environmental and health problems due to hazardous substances, appliances
and rechargeable and non-rechargeable batteries marked with one of these symbols
must not be disposed of with unsorted municipal waste. Always dispose of electrical
and electronic products and, where applicable, rechargeable and non-rechargeable
batteries, at an appropriate official recycling/collection point.
6

Publicidad

loading