Operation; Lux, Time Knob; Lux Learning Function With Knob - koban KDP1 Manual De Instrucciones

KDP1 360 FP
Presence detector

Operation

Lux, Time knob

Follow the marked values to adjust Lux & Time knobs according to users
requirement.
Set delay
off time for
load
Set the light
value for
switching on
2000
load
10
300
100
Lux learning function with
knob
Learning procedure:
• Adjust the knob to "
the ambient light level matches
with the desired value (See
FIG.20-A).
• When the knob is set to "
originally, it should be adjusted
to other position more than 1
sec, then goes back to "
(See FIG.20-B).
• Then the load is off. LED starts to
flash slowly indicating entering
into learning mode. Learning will
be completed within 25 seconds.
Afterwards, the LED and load will
keep on 5sec or LED flashes
Instructions manual |
Time: Adjustable from about 5sec
to 30min.
Test : Walk test operation (2sec on
/ 2sec off).
: Short impulse for staircase
1s
timer switch control (1sec on,
9sec off).
Range :
10 Lux to
( learn): The actual ambient
" when
"
"
34
Adjustable from approx.
".
light level (10 -2000 Lux)
can be read in.
2000
10
300
100
Adjust knob to
" " from
other position
2000
10
300
100
FIG.20-A
2000
10
300
100
Adjust knob to
other position
from " "
2000
10
300
100
1sec after, goes
back to " "
2000
10
300
100
FIG.20-B
www.grupotemper.com