Use Of The Device - Project E Beauty PE731 Manual Del Usuario

Follow these steps to ensure proper operation during a treatment:
1
Before you rst use the device, charge it for 3
hours.
For charging:
Simply connect the USB cable to common 5V USB
power source. Connect the cable to the charging
jack on the device.
Battery Indicator:
Low Battery: Green LED blinks
During Charging: Red LED stay on
Battery Full: Red LED goes out
2
Insert the red LED head into the main unit
and hear the pop sound when it ts.
3
Clean the surface with a dry cloth if
necessary. Make sure your face is clean,
dry, and wiped free of any oil or cosmetics
before using the device.
4
Put on the goggles before the treatment.
Be sure you never look directly into the LEDs.

Use of the Device

WARNING
9