Di4 Acqua Rs3 Instrucciones Originales página 44

The electrical supply connection shall be made by a
qualified person and comply with IEC 60364-1. The
electric supply to this appliance should include either a
residual current device that will interrupt the supply if the
leakage current to earth exceeds 30 mA for 30 ms or a
device that will prove the earth circuit.
Prepare an inlet water hose with a quick connector on
one side (the hose and connector are not included in
this machine). Screw the inlet adaptor onto the machine
inlet tube. Push and connect the quick connector to this
adaptor. On another side of water hose, the user can
choose a tap connector or a water filter based on actual
situation.
This machine has a function of auto suction; it can
suck water from a pool when the user keeps pulling the
trigger of spray gun. Please be noted that the vertical
height between machine and water pool does not exceed
2meters. And a proper filter should be ready with water
hose in case of dirt coming from water.
Make sure it can withstand water and a maximum
pressure of 0.3 MPa (3 bar). If you want to connect
your device to other water sources, make sure that the
maximum water inlet pressure is 0.3 MPa (3 bar). The
minimum recommended length for the water supply
hose is 10 meters (but no more than 25 meters) with a
diameter of 1/2"
the machine does not connect to potable water mains
44