Publicidad
Idiomas disponibles
Idiomas disponibles
DESCRIPTION PARTS
1
2
3
4
ASSEMBLY
The device is packaged with the brackets loose. They must be fitted before using the appliance.
WARNING:
Do not use the appliance without the support attached. Only use the heater in an upright
position (feet on the bottom, controls on the top), any other position could create a dangerous
situation.
1. Place the radiator body upside down in a scratch-free and stable place.
2. Unscrew the wing nuts from the provided U-bolt, Attach the U-bolt to the U-flange between
the first and second heating element.
3. To attach the wheel mounting plate to the radiator body, you must insert the threaded ends
of the U-bolt into the holes in the wheel mounting plate.
4. Screw the wing nuts back onto the U-bolt and tighten the wing nut properly.
Note: Do not over-tighten as it may damage the heating element.
5. Unscrew the ball nut from the wheel, align the axle with the hole in the wheel mounting plate,
insert it, and screw in the ball nut.
6. Repeat 2, 3, 4 and 5 at the rear of the radiator to mount the rear wheels.
Note: the rear wheels must be mounted between the last two heating elements.
1. Handle.
5
2. Power Switch.
3. Thermostat.
4. Housing for cable.
6
- 11 -
5. Heat Elements.
6. Castors.
Publicidad
