Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
1. Before using the appliance, make sure it is on a flat and stable surface, damage may occur if
it is placed on a slope.
2. Place all controls in the OFF position and insert the plug into a grounded electrical outlet.
Make sure the plug fits firmly.
3. Turn the thermostat knob clockwise to the MAX position and turn the appliance on to the
desired power from the following options:
a) activating only button I (see the power in the table depending on the model),
b) activating only button II (see the power in the table depending on the model),
c) activating both buttons I and II (see the power in the table depending on the model).
4. When your room reaches the desired temperature, now slowly turn the thermostat knob
counterclockwise until the pilot light goes out. The thermostat can now be left at this setting.
As soon as the room temperature drops below the set temperature, the unit will automatically
turn on until the set temperature is reached again. In this way, the ambient temperature is kept
constant with the most economical use of electricity.
5. If you want to change the room temperature setting, turn the thermostat knob clockwise to
raise the temperature or counter-clockwise to lower it.
6. This heater includes an overheat protection system that shuts down the heater when parts
of the heater become excessively hot.
7. To completely shut off heater, turn off all controls and remove plug from outlet.
NOTE.
For proper operation and maintenance of the room temperature, the door to the room should
be closed with no windows open.
Remember never to leave the appliance switched on without supervision.
CLEANING AND MAINTENANCE
1. Always remove the plug from the socket and allow the radiator to cool down.
2. Clean the radiator with a damp (not wet) soft cloth.
3. To store the appliance, wrap the cord in its cord holder and store the appliance in a clean
and dry place.
4. In case of breakdown, do not try to repair the radiator yourself, it may cause fire or electric
shock.
WARNING:
Do not immerse the heater in water.
Do not use abrasive or chemical cleaners, only neutral detergent.
Do not allow the interior to get wet, as this could create a hazard.
- 12 -
Publicidad
