Identification Of Parts; Control Panel - kayami AFC-9000 Manual De Uso Y Cuidado

IDENTIFICATION OF PARTS

CONTROL PANEL

Stand-by button.
Timer button.
Sleep button.
Automatic, Cool, Dehumidify, Fan mode and heating.
Lock.
Control panel operation
• Automatic, Cool, Dehumidify and fan Mode operation
1. Turn on the unit
a) Plug in,then the unit beeps once.
b) Press the button, then the unit is turned on.
The LED displays the room temperature and operate in Automatic mode.
2. Select operating mode
Press the button to select a desired mode shown below:
3. Adjust Temperature
The temperature can be set within a range of 15 ºC to 31 ºC by 1ºC.
Press + or –
The unit LED shows the target temperature for 5 seconds and then displays the room temperature.
4. Adjust Fan Speed
Pres the button to select a desired fan speed shown below:
5. Stand-by
When you press
This section explains proper mobile air conditioner operation.
Speed button.
Mode button.
low, high Fan speed.
button to increase or decrease the temperature 1ºC by pressing once.
button again, the unit will emit "di" and stop working.
Timer/Temperature up button.
Timer/Temperature down button.
41