Important - Beninca SC.RF Manual De Instrucciones

In order to memorise the code on channel 2, proceed as follows:
1) Press push-button P of the SC-RF RECEIVER once
2) The LED LD1 switches on with RED light.
3) Press push-button P once again
4) The LED LD1 switches to GREEN light.
5) Within 30 seconds, press push-button S1 of the RF/RF.SUN
device for around 4 seconds.
6) The LED LD1 switches off temporarily and a buzz indicates
that the storage in memory has been successful.
7) Await that the LED LD1 switches off.

IMPORTANT!

Up to 4 different devices can be memorised on each sin-
gle channel. When the memory available is full, the LED will
flash three times.
HOW TO RESET THE SC.RF RECEIVER
If all presetting must be erased and the SC.RF receiver must be
restored to factory pre-setting:
- Cut power supply off.
- Press push-button P and keep it pressed.
- Power the system again, keeping the push-button P pressed
on the receiver.
- The LED starts flashing with red/green light. After around 5
seconds, when the light turns orange, release the button P and
wait that the LED switches off.
DIAGNOSTICS
During normal operation, the colour of the LED indicates the
status of the two channels:
Red LED – channel 1 activated
Green LED – channel 2 activated
The Buzzer (if enabled) indicates the following events:
- device switching on
- exit from configuration menu
- down battery of the mobile device (also the LED on the mobile
device switches on periodically).
DISPOSAL
When the product is out of order, it must be disposed accor-
ding to regulations in force on waste disposal and recycling of
the various components (metal, plastics, electrical wires, etc.).
For this purpose, it is advisable to contact your installer or a
specialised company.
Specification
Frequency
Power supply
Protection level
Range
Channels
Relay contact
Operating time
Consumption at rest
Consumption with 1
channel
Consump. 2 channels
activated
SC.RF
868 MHz
12/24 Vac/Vdc
IP 30
Without antenna - 30m
With antenna - 100m
2 (4 devices max for each
channel)
1A/24 Vdc
-20/+50°C
10 mA
42 mA
66 mA
7