Publicidad
Idiomas disponibles
Idiomas disponibles
Mode LED
Function
1
1 rapid blink
Set pulse mode
Press the button P for at least 3 secs
2
2 rapid blinks
Select switching time
Press the button P for at least 3 secs
3
3 rapid blinks
Set Bistable mode
Press the button P for at least 3 secs
4
4 rapid blinks
Set continuous mode
Press the button P for at least 3 secs
4
Off
No function
LED Blinks
Switching Time
1
1s
2
2s
3
3s
4
4s
5
5s
6
6s
7
7s
8
8s
12
Operation
If the P button is not pressed within 5 secs the channel is reset to the default pulse mode (1 sec
switching).
If the P button is not pressed within 5 secs the LED will start blinking at a rate of 1 blink/sec
until the button P is pressed. The number of blinks counted before pressing the P button selects
the switching time, as shown in table 3.
If the P button is not pressed within 5 secs the channel is set to the bistable mode: the relay
changes status on each pulse.
The relay switches each time the corresponding key in the transmitter is pressed and returns to
its original status after its realise.
Normal status.
LED Blinks
Switching Time
9
9s
10
10s
11
30s
12
60s
13
1,5m
14
2m
15
2,5m
16
3m
TABLE 2
TABLE 3
LED Blinks
Switching Time
17
18
19
20
21
22
23
24
LED Blinks
3,5m
25
4m
26
4,5m
27
5m
28
1m
29
2m
30
3m
4m
Switching Time
5m
6m
7m
8m
9m
10m
Publicidad
