Descargar Imprimir esta página

Technical Data; Intended Use; Safety Informations - BGS technic 86692 Manual De Instrucciones

Dispositivo de soldadura de cartucho universal

Publicidad

Idiomas disponibles

Idiomas disponibles

TECHNICAL DATA

Power: 3500W
Gas consumption: 110 - 254 g/h
Flame temperature: 1300°C
Working temperature: 650°C
Gas type: Butan catridge 190 g (EN 417)
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.

INTENDED USE

This product is used to heat materials in well-ventilated areas or outdoors and works with 190g
butane cartridges, in accordance to EN417 standard.

SAFETY INFORMATIONS

Keep children and other persons away from the working area.
Do not allow children to play with this tool or its packaging.
Do not use the tool if parts are missing or damaged.
Use the tool for the intended purpose only.
Use only the specified gas cartridges. Use of other gas cartridges can be dangerous.
Do not tamper or modify this product.
Use this product only in a well-ventilated area or outdoors.
Place the product on firm, level surfaces only.
The product must not be used near flammable materials or substances.
Replace the cartridge outdoors or in a well-ventilated area, away from hazardous sources such
as open flames, electric stovetops, and far away from other people or animals.
To check that the device is leaktight, go outside and do not use a flame, but soapy water. Do
not use the device if the seal is damaged or old. Do not use the product if it is leaking,
damaged, or defective.
Do not use the product if it malfunctions.
Always place the product far away from hot surfaces or other heat sources.
During use, the device reaches high temperatures in the vicinity of the burner. Do not touch the
device when it is hot. After turning off the device, wait a few minutes to ensure that you will not
be burned during transport.
Never point the device at people or animals.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Universal cartridge soldering torch
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 86692
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed

Publicidad

loading