Zeiss 432610-9060-000 Manual Breve página 6

ZEISS
4 NOTES ON WARRANTY
The manufacturer guarantees that the instrument is free of material or manufacturing defects upon
delivery. Any defects must be reported immediately and steps taken to minimize damage. If such a defect
is reported, the instrument manufacturer shall be obliged to correct the fault, either by repairing the
instrument or replacing it with a new one, at the manufacturer's discretion. No warranty is given for
defects caused by natural wear and tear (particularly of wearing parts) and improper use of the
instrument.
The instrument manufacturer shall not be liable for damage caused by misuse, negligence or any other
tampering with the instrument, particularly the removal or replacement of instrument components, or
the use of accessories from other manufacturers. Such actions shall invalidate any warranty claims.
With the exception of the work described in this quick reference guide, no maintenance or repair work is
to be carried out on the Power Supply 12V 100W. Repairs may only be performed by ZEISS Service or
individuals specially authorized by ZEISS Service. In the event of a problem with the instrument, please
contact your local ZEISS representative.
5 INTENDED USE
Product name:
Order number:
The Power Supply 12V 100W is used to provide power for illumination systems of microscopes (e.g.
HAL 100 or LED illumination of Axio Scope.A1, Axio Examiner or Axio Imager) for transmitted and/or
reflected light applications.
6 ADDITIONAL APPLICABLE OPERATING MANUALS
Operating manual Axio Scope.A1
−
Operating manual Axio Imager
−
Operating manual Axio Examiner
−
Operating manual Axio Observer
−
4
NOTES ON WARRANTY
Power Supply 12V 100W
432610-9060-000
432610-6044-008
Power Supply 12V 100W
09/2017