Publicidad
Idiomas disponibles
Idiomas disponibles
All rights are expressly reserved. Duplication or
transfer on to third parties in any form whatsoever
is not allowed without our prior written permission.
Abbreviations
V
Volt
A
Ampere
Hz
Hertz
W
Watt
~
AC
/min
Revolutions per minute rpm
N
Newton
4. SAFETY INSTRUCTIONS
The basic prerequisite for safe handling and
disturbance-free operation of this electric tool
is knowledge of the basic safety instructions.
In addition, the accident prevention rules and
regulations which apply in the user location must
be adhered to, as well as the recognized rules of
the trade with regard to safety and correct working
methods.
It is not permitted to use the electric tool for other
purposes than those intended by the manufacturer.
Such use could give rise to unforeseeable risks.
Local working and safety rules and laws must always
be followed. The same applies to regulations which
apply to the environment.
Safety equipment must never by removed or
bridged over.
When using oils, greases and other chemical
substances, the safety regulations which apply to
the particular product must always be observed!
Contact with chemicals should be avoided as far
as possible. Before it is permissible to work with
these substances the instructions for use on the
packaging must be read and followed. This applies
for all chemicals, therefore also for cleaning media.
All notes and signs regarding safety and possible
risks must be kept in a fully legible condition.
4.1.
ILLUSTRATION OF SAFETY INSTRUC-
TIONS
The following symbols are used in the instruction
manual:
Warning against possible danger of
injury or danger to life for persons
6
Warning against possible damage to
property or the environment
Warning against dangerous electrical
voltage
Warning against hot surfaces
Ignoring these instructions can lead to serious
damage to health, up to life-threatening injuries!
This symbol indicates important
information
Hazardous to the environment
4.2.
GENERAL SAFETY INSTRUCTIONS
This electric tool fulfils the basic EC
safety
and
Nevertheless, dangerous situations
can arise.
All
safety
maintained in perfect condition.
Always pay attention to moving
parts. These can cause injury because
of their movement or by sudden
movement.
Only use the electric tool when it is in
perfect condition from the technical
point of view, and only use it for
intended purpose while being aware
of safety issues and risks, and paying attention
to the instruction manual! In particular, have any
disturbances which could have a negative effect
on safety corrected immediately!
WARNING! It is essential to read all the
instructions. Mistakes which are made while
attempting to follow the below instructions can
cause electric shock, fire and/or serious injury.
The following term "Electric tool", refers to
mains-powered electric tools (with mains cable)
ENGLISH
health
regulations.
equipment
must
be
Publicidad
