Sanus Systems VMSA Instrucciones De Armado página 9

Step 6: Hang the assembly onto the Wall Plate
Warning: This step may require 2 people to lift the assembly onto the Wall Plate! Sanus is not responsible for injury
or damage.
sion. Some televisions may require 2 people to lift.
of the Wall Plate (a) as shown in Diagram 6a. Adjust the transfer bracket side to side on the Wall Plate until it is in the desired location.
that they are behind the tab on the bottom of the Wall plate as shown in Diagram 6b.
Diagram 6a
transfer bracket
Step 7: Leveling the Monitor
WARNING: Do NOT remove the Nut in Detailed View A or Detailed View B of Diagram 7! Doing so will cause the
television to fall!
level. When the television is level retighten the two allen bolts. The tilt can be adjusted by loosening the knobs and tilting the television.
tightened or loosened to adjust the tension of the Arm Assembly.
Detailed View A
nut
wall
tab
Diagram 7
knobs
Diagram 6b
tab
dd
Detailed View B
dd
allen bolts
-
nut