Publicidad
Idiomas disponibles
Idiomas disponibles
in the booklet supplied with the other appliance.
IMPROTANT
During use the appliance becomes hot, Care should be taken to avoid touching heating elements
inside the oven.
Accessible parts may become hot during use. Yong children should be kept away.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since
they can scratch the surface, which may result in shattering of the glass.
For a built-in oven to work well the cabinet must be of the right type.
The panels of the adjoining furniture should be heat resistant. Particularly when the adjoining furniture
is made of veneered wood, the adhesives should be able to withstand a temperature of 120℃. Plastic
materials or adhesive which cannot withstand this temperature will become deformed or unstuck.
To comply with safety regulations, once the appliance has been fitted it should not be possible to make
contact with the electrical parts.
All parts which offer protection should be fixed in such a way that they cannot be removed without the
use of a tool.
Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric
shock.
CONNECTION TO THE MAINS SUPPLY
THE APPLIANCE MUST BE CONNECTED ACCORDANCE WITH THE RULES
CURRENTLY.
IN FORCE, AND ONLY BY AN AUTHORIZED ELECTRICAL INSTALLER.
WARNING: THIS APPLIANCE MUST BE EARTHED
Check that the power rating of the mains supply and of the sockets are suitable for the maximum
power of the appliance as indicated on the specification plate.
plug should be accessible after installation. Fit the plug into a socket fitted with a third contact which
corresponds with the earth connection. This should be properly connected.
If the appliance just fitted with supply leads but does not come already fitted with a plug, then
permanently connect to fixed wiring as follow:
The "yellow/green" earth wire, which must be connected to terminal, has to be about 10mm longer
than the other wires; the "blue" neutral wire has to be connected to the terminal marked with letter N.
"Black, brown, red" live wires have to be connected to terminal L. Mains connection can also be made
5
Publicidad
