Converting for GROUPS 2-3 (15-36kg)
It is recommended that you use the 5-point harness for as long as possible. If you remove
the booster cushion this could allow you to use the seat in group l configuration for longer.
When your child has outgrown the group 1 (9-18kg) configuration and you wish to use the
A
A
B
B
Note: the car seat "ISODINAMYK" must be used with ISOFIX anchors and TOP
TETHER.
IS0DINAMYK
All manuals and user guides at all-guides.com
seat for a child in either group 2 (15 - 25kg)
or group 3 (22-36kg) then you will need to
remove the child car seats integral 5-point
harness.
Lift the fabric adjuster cover at the front of
the car seat and whilst pressing button (A),
pull forwards on the shoulder straps (not
the shoulder pads) to completely loosen the
harness straps and shorten the adjuster strap
(B) as much as possible. Any remaining strap
can be rolled up and stored under the red
C
plastic cover (C).
IMPORTANT: DO NOT pull the shoulder
C
pads.
Pull the recline adjuster handle under the
front of the shell and whilst holding it, pull the
shell forwards to its most reclined position.
Release catch (D) on the top left hand side of
E
the shell and remove the installation bar (E).
E
39