Your connected module is now operational and
appears in your dashboard. Wait until the icons
change from grey to black (indicating confirmation
of connection to your WiFi network).
If this does not happen and the icon remains grey,
you must have a connection problem. Check the
range and your WiFi connection. Check also that
the module is adequately powered.
You can now control your roller shutters and blinds
from the At Home interface on your smartphone.
WIFI CONTROL MODULE FOR ROLLER SHUTTERS AND BLINDS
5 - RESETTING THE MODULE
The following instructions may help you if you have
any problems during the pairing procedure:
To reset the module to zero, press and hold (for at
least 10s) the button located on the back of the
module. The module indicator light will start flashing
to confirm the operation.
The Access module must also be deleted from the
mobile app. To do this, simply press on (1) the 3
vertical dots, then (2) delete.
1
3 vertical dots
2
Delete
Important: resetting does not delete inversion of
the module' s raising and lowering channels from the
memory (see the paragraph on tips on page 10).
C - INSTALLATION
1
2
9
EN