FAULT HANDLING
If the problem cannot be solved or other problems occur, please contact the after-
sales service.
The fault phenomenon
After cooking, the machine still
has the sound of working (the
sound of the fan rotating).
There is a sound in the oven
cavity when the oven is working.
The first use has an unpleasant
smell.
The machine was smoking.
The food is not cooked.
Furnace light not on.
TECHNICAL PARAMETERS
Model
Usable Volume
ECelectric, cavity (
Energy e ciency class
Possible causes
Fan delay blowing, used for heat
dissipation.
1. The sound of a cavity expanding
by heat and contracting by cold.
2. The furnace cavity is not
cleaned for a long time, which
accumulates a lot of grease.
Heating tube with anticorrosive
coating, heating after melting
smell.
1. Product failure damage.
2. The furnace cavity has oil, food
residue, etc., not cleaned in time.
1. The heating time is too short.
2. Oversized portions of food.
The furnace lamp is broken.
CCHM300X
65L
.
)
0.79 kW h/cycle
A
Rated voltage
Rated frequency
ECelectric power
EN-14
Processing method
Under normal conditions, food
can be taken out normally without
treatment;Do not unplug the fan
while it is in operation.
1. Belong to normal condition,
need not deal with.
2. Wipe the heating tube and
furnace cavity with a clean
towel.
For the first use, please heat the
cavity in a well-ventilated
environment for half an hour.
1. Turn off the power and seek
after service.
2. Wipe the heating tube and
furnace cavity with a clean towel
1. Prolong the heating time
appropriately.
2. Break the food into small
pieces or cook it multiple times.
Please seek after service.
220-240V~
50Hz-60Hz
2.1 kW