Publicidad
Idiomas disponibles
Idiomas disponibles
EN
j.
NOTICE: Due to the high pressure
FR
that is created with the OTTOVAC we
ES
strongly recommend that you do not
attempt to attach the OTTOVAC to
glass thinner than 6mm thick.
Damage can occur to glass that is
thinner than 6mm thick.
k.
The OTTOVAC is not designed or
intended for climbing or securing
people in any way. Using this
product for climbing or any other
unintended purpose may result in
injury or death.
l.
Before each use, make sure the
suction pad is smooth, clean,
undamaged and without any cracks.
m.
Clean the suction pad regularly with
methylated spirit or other non-
aggressive cleaners.
n.
Make sure the surface/object to be
lifted is made of non-porous
material. In addition, the surface
must be clean, dry and free of oils
and grease.
o.
On rough or porous surfaces, the
holding capacity decreases or is non-
existent.
p.
Do not use sharp objects to loosen
the suction lifter from the surface as
this will damage the suction pad.
q.
Only use the suction lifter if you are
experienced or supervised by
someone experienced in handling
this tool.
14
r.
Always test the functioning of the
suction lifter before use. Examine the
handle for dents or cracks. Examine
the rubber pad for excessive glaze,
cuts or roughness.
s.
OTTOVAC should only be used for
lifting, carrying and holding objects
for a short period of time. However,
in cases of long periods of
attachment, check the vacuum gauge
Ⓓ regularly to ensure firm grip.
t.
OTTOVAC is a hand tool and should
not be used as a crane, hoist or
similar. Store OTTOVAC in a flat
position when not in use in its
original storage box.
u.
Before use, always check the rubber
pads for possible loss of suction
capacity due to reduced elasticity
caused by excessive age, usage,
maintenance, storage etc. Rubber
pads that are damaged or lack
sufficient suction capacity must be
replaced. Never use OTTOVAC with
damaged rubber pads or insufficient
suction capacity!
v.
Do not exceed the stated lifting
capacity. Cold temperatures,
humidity and pollution, carelessly
treated or even damaged suction
pads or usage on materials other
than glass and smooth, flat non-
porous material may reduce the
holding capacity considerably.
Publicidad
