BGS technic 9394 Instrucciones De Uso página 6

USE
Balance shaft chain tensioner retaining pin (3) is used
to lock the balance shaft chain tensioner in it fully
retracted position. Push the tensioner plunger fully in
and insert pin.
Auxiliary Belt Tensioner Locking Pin (4) is used to lock
the auxiliary drive belt tensioner in it fully retracted
position.
Camshaft drive chain tensioner plunger resetting tool
and holder (5/6) is used to reset the cam chain
tensioner in its retracted position prior to refitting.
Using tool (6) to hold the tensioner in a suitable vice
and use tool (5) to push and lock the plunger in its
retracted position by turning.
Locking tools (7/8) for left & right hand camshafts are
used to lock the camshafts in their timed position
separate of the variable valve timing adjusters.
Camshaft adjuster holding tool (9) is used to lock the
VVT adjusters in their timed positions.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed