Publicidad
Idiomas disponibles
Idiomas disponibles
4.5 Changing and adjusting the saw band
Use the following procedure to change the saw
band:
1.
Pull out the power plug of the machine.
2.
Loosen the knurled screw (2) and remove the
upper cover.
3.
Loosen the knurled screw (8) and remove the
lower cover.
4.
Loosen the two fillister head screws (11) and
remove the band guard (12).
14
Caution
Risk of injury from a stopped saw band
The saw band is sharp. You can hurt yourself when you work on the saw band.
Wear protective gloves when you work on the saw band.
➢
➢
Be careful when you work on the saw band.
Fig. 3: Removing upper and lower cover
Fig. 4: Removing the band guard
Z5Ec
02/2022
Publicidad
